SwanRobotics Blog

0

3D Print results

From Monday till Friday I don’t use my Ultimaker 3D printer a lot. I have to work during the day and I am at the office. In de evening I don’t print because the kids are...

0

InMoov Top Skull Right Side

After a 8 hour print the next parts of the inMoov head are ready. I have printed the TopskullRightV2 parts. In one print you get three parts at once. The left side was already done. The...

0

BOB the Biped

I try to get my kids involved into robotics. There is only one problem. I have two daughters. They are interested but the things I build are not attractive to see so they are bored very...

0

Self driving Car Course

I found training material on the Internet about self driving Cars at Udacity. It’s a high quality course with instructor Sebastian Thrun from Stanford University. He explains all the basic concepts of autonomous cars and uses examples...

0

inMoov work in progress

It’s amazing what some people publish on the Internet. For a while now Gael Langevin has published his designs for a life size humanoid robot. With a 3D printer and some skills you can build this...

0

The HC-SR04 project

Yes. Another project is published today. This project is all about the HCSR04 ultrasonic ranging module. This not to expensive sensor is great for robot projects. In this project I explain how to use it with an Arduino. You...

0

GP2D12 Project added

On the last day of the year I managed to add a new project after a long time. This little project is all about the GP2D12 sensor. With this sensor you can measure the distance to...

0

New content on the Tools page

I have added a simple board you can build to measure Current and Voltage at the tools pages. You can find it here http://www.swanrobotics.com/USBMeasurements

0

Update on the Wireless Arduino Project

I got a remark from Johan because he found out that you have to disconnect the APC220 before uploading the sketch. I have added it to project page.  http://www.swanrobotics.com/Wireless_Arduino