SwanRobotics Blog

0

inMoov prints

A quick post to show the results of this weekend prints on the Ultimaker. 4 parts of the inMoov shoulder. Please visit www.inmoov.fr for the designer of the inMoov robot.

0

Hello world!

Hello World, The SwanRobotics website has moved from Drupal to WordPress, but the information is not there yet. During the coming weeks I will publish the old information of the previous website. On this website some...

0

inMoov has a head

Finally I have some progress on my inMoov robot. In my last I described a method to hack servos for the shoulder and the arm, but my inMoov Torso was still headless. The robot has a...

2

Servo Hack

The inMoov Robot needs a lot of servos. You need multiple servos for the head, shoulders, arms and fingers. The designer Gael Langevin is now developing the hips so we even need more servos (It’s worth...

2

inMoov torso on a stick

All the parts of the InMoov torso are ready and I have put it together. Yes!!!! The torso is the main body part of the InMoov because the head and the arms are attached to...

0

Progress inMoov torso

Slowly but surely the InMoov torso is taking shape. There are a lot of parts to print. I damaged my Ultimaker printer by pulling to hard at the filament. I had to wait for spare parts,...

0

BOB the Biped legs

While printing the inMoov robot I made some progress on BOB the Biped. This is an open source project build by K.Biagini. You can find it at http://www.instructables.com/id/BoBtheBiPed/ To build BOB you have to print 6...

0

Print, Print, Print,……

As always I print only during the daytime. The Ultimaker 1 is a fine printer, but it produces just too much noise to print at night. The inMoov Robot has a lot of part. Below...

2

Servo’s in inMoov head

To complete my inMoov head I had to do two things. Mounting the jaw with its servo and the eye mechanism. The jaw part is done now and it is working fine. The servo has to...

0

Progress on inMoov

I have made some progress on the inMoov Robot head. All the parts fit nice. I was really surprised by the result, because it’s a large print with a lot of parts. Applause for Gael Langevin the...